High Efficiency Degumming Enhancer

High-efficiency gelation enhancer has the following advantages:

1, easily soluble in water and the aqueous solution does not have any viscosity at the same time also has a strong gel, after adding to speed up the flow rate of mud, compared with other enhancers can greatly reduce the amount of water reducing agent can also reduce the water content of mud, saving the high energy consumption of spray drying tower.

2. After the product is added to the mud, it is not easy to rot for a long time, and there will be no failure or greatly reduced effect like lignin or cellulose when stored for more than 24 hours.

3, the intensity increased significantly, no sandwich or black heart phenomenon; for the green environmental protection products, relative to the odor and dust enhancer is conducive to the improvement of the operating environment and the physical and mental health of the operator.

4, can further improve the mud thixotropy, so that its thixotropy is reduced, mud will not appear "tofu brain" phenomenon, is conducive to the slurry and mud in the transport of production control.

5, can replace the current increasingly scarce clay, reduce the amount of brick blank ratio, every 0.1 addition will be a corresponding reduction of clay by more than 3%, and green strength whether before drying or after drying are greatly improved.

6. After replacing the plastic clay with high iron content, the whiteness of the green body can be increased by about 3 degrees, the amount of zirconium silicate whitening agent can be reduced, and the color development force of the brick will be significantly improved, and the addition of a larger proportion of pigment can be saved.

7, brick due to the reduction of clay, making the loss of plastic mud is reduced, can achieve low temperature fast burning, improve the kiln production rate, save fuel costs.

8, due to less clay, after the formula structure adjustment, ball milling can save about 20% of the energy cost; Reduce mud moisture by about 8%; Can reduce the powder manufacturing cost by about 10%.

9. Improve the use efficiency of the press, improve the pressing efficiency of the brick blank, and extend its service life.